FREE Shipping on all orders over $75
< Back

You have not viewed any products recently.

Enlarge View
Alternative Views

Jet Boil

Coffee Press - Standard

sku# 33141240500000

Product Description


Upgrade your backcountry beverage selection with our feather-light Coffee Press. Stem detaches from basket so you can stow in your Jetboil system cup.

Compatible with Zip, Flash, Flash Lite, PCS Sol and Sol TI. Also compatible with the 1-Liter Tall and .8-Liter Spare Cups.​​


  • Coffee Press - standard size
  • The featherweight Coffee Press brings civilization with you, even to the most uncivilized locations.
  • Stows securely inside the Jetboil PCS.
  • INSTRUCTIONS FOR USE 1. Setup Jetboil Personal Cooking System (PCS)
    according to JETBOIL SETUP & IGNITION instructions.
    Remove Jetboil coffee press from plastic package.
    2. Gently thread Upper Rod and Lower Rod together.
    Insert Rods into provided lid through top hole. Then
    thread into Basket, with basket facing down (as shown).
    3. Heat desired amount of water according to Jetboil
    PCS COOKING & HEATING instructions.
    4. Turn flame off and remove cup according to Jetboil
    AFTER COOKING OR HEATING instructions (replacing
    plastic cover on base). Add coarse ground coffee into PCS
    and stir. 1 heaping tablespoon recommended per cup.
    5. Place coffee press on top of PCS. Secure lid. Let coffee
    brew for at least 3 minutes.
    6. Place PCS on a flat, dry, non-slip surface. Hold firmly
    with spout turned away from you, then apply slight
    pressure on top knob to slowly lower coffee press
    directly down into PCS. Pour coffee using spout or drink
    from lid.
    7. Clean after each use. Follow Jetboil STOWING
    instructions for proper PCS storage. Unscrew threaded
    parts. Store basket inside plastic cover or upside down
    underneath fuel canister. Stow Rods together in opening
    slot of burner base.


  • Item Weight: 0.8 oz (22 g)
  • Dimensions: 3.9" (100 mm) diameter x 5.9" (150 mm) Assembled
  • Tips: Always turn the burner off before adding coffee grounds.
    Make sure the strainer basket is screwed on to the stem with the flat/non-concave side facing up.
    Use very hot water, but not necessarily boiling water.  Look for lots of little bubbles clinging to the bottom and side of the cup, some steam and some movement at the surface of the water.
    After your add to your grounds, poke them a bit to get them moist.
    Wait 3 minutes before you plunge the press down to make sure the grounds have been well-steeped.

May We Recommend

Store events, Pre-sales, more