Finally, a knife Sharpener anyone can use! No more messy oils or stones. In about 10 seconds, sharpen knives, (even serrated knives), cleavers, axes, machetes, and many other cutting tools. The large ergonomic handle fits either hand safely and securely. The full length finger guard protects your fingers. Sharpening blades are Diamond Honed Tungsten Carbide for years of reliable use. AccuSharp Knife Sharpeners will not rust and can be cleaned with soap and water or in the dishwasher. Replacement sharpening blades are available.
To use, place knife on table or counter top with the cutting edge up and with about 1/2” of the blade tip extending past the edge of the table as shown in the illustration. While holding the knife handle with one hand, hold the AccuSharp® as shown with your fingers through the opening formed by the handle and the finger guard. REMEMBER: THE SHARPENER MOVES WHILE THE TOOL BEING SHARPENED REMAINS STATIONERY.Straddle the knife’s cutting edge near the handle of the knife with the “V” notch formed in the sharpener. With the head of the AccuSharp® at about a 90° angle to the knife’s edge press down LIGHTLY using thumb pressure and draw the AccuSharp® past the point of the blade. You will feel the tungsten carbide sharpeners removing metal from the knife. Several passes in this manner may be required before your knife’s cutting angle conforms to the proper angle of AccuSharp®. Once that angle is achieved then two or three passes should be sufficient to bring your knife back to a sharp edge.
Length: 5.50 inches.